ToAuto Electric Melting Furnace Trouble Shooting-Panel shows 0000
If you machine shows 0000 on the setting panel, please don't worry. It is a very simple issue.
How to solve the issue?
Step 1: please open the botton cover of the machine and check the thermocouple signal wire. If it is not wired well, just connect it well.
Step 2: If the thermocouple signal wire is all well, it means the probe is broken and it needs to be replaced. Please contact customer service (service@toautotool.com) for a replacement. Please remember to add your order number in the email, and also a photo of the machine setting panel, so we can know the correct version of the machine.
How to change the probe?
Please refer to this video.
https://www.youtube.com/watch?v=9ViCLYBdD5A
2 comments
My furnace comes on clickes then flashes a row of4 zeros and arow of four 1’s its new never been used yet. I tried the reset it wont go to 16 on the lck
Furnace flashing through numbers. Clicking to 0000 then flashing through numbers again. Not heating